联系方式:
地址:郑州市高新区莲花街316号
电子电器产业园
(圣世嘉业6号楼305)
电话:0371-63751608
传真:0371-63752708
手机:13103833308(徐经理) |
|
|
|
| 容器罐槽系列》混合机:V型单臂混合机V-shaped single-arm mixer |
|
| |
V型单臂混合机 V-shaped single-arm mixer |
| V型干粉混合机 V TYPE DRY POWDER MIXER |
小型干粉V型混合机,粉末搅拌机,V型设计不对称混合机,它适用于化工、食品、医药、饲料、陶瓷、治金等行业的粉料或颗料物料的混合,该机结构合理、简单、操作密闭,进料方便(人工或真空填料)整体采用304不锈钢材料制作,便于清洗,是企业的基础设备之一。
Small dry powder V-type mixer, powder mixer, V-shaped design asymmetric mixer. It is suitable for the mixing of powder or granular materials in industries such as chemical engineering, food, medicine, feed, ceramics, and metallurgy. The machine has a reasonable structure, is simple to operate, and is sealed. The feeding is convenient (by manual or vacuum filling). The entire machine is made of 304 stainless steel, which is easy to clean and is one of the basic equipment of the enterprise.
本机适用于制药化工食品等行业两种以上的干粉状,或颗粒状物料的混合。
This machine is suitable for the mixing of two or more kinds of dry powder or granular materials in the pharmaceutical, chemical, food and other industries.
该混合机简洁结构独特,混合效率高,无死角,采用不锈钢材料制作。内外壁采用的是抛光处理。外形美观,混合均匀,适用面广,且可根据用户的需求配套强制搅拌器,以适合较细的粉料。
This mixer features a simple and unique structure, high mixing efficiency, no dead corners, and is made of stainless steel. Both the inner and outer walls are polished. It has an attractive appearance, ensures uniform mixing, and has a wide range of applications. Moreover, it can be equipped with a forced agitator according to the user's requirements to suit finer powder materials.
本机不能混合含有水分和油腻的物料!
This machine is not capable of mixing materials that contain moisture and grease! |
|
| 干粉混合机简介与特点 BRIEF INTRODUCTION AND CHARACTERISTICS OF DRY POWDER MIXER |
干粉V型混合机粉末搅拌机概述
Overview of Dry Powder V-Type Mixer/Powder Blender
:
本机适用于制药、化工、食品的干粉状、颗粒状物料的混合。该机混料简单结构独特,混合均匀,效率高,不积料。整机结构简单,操作容易,外表面和物料接触部分均采用优质不锈钢制造,造型美观,维护,清洗方便。
This machine is suitable for mixing dry powder and granular materials in the fields of pharmaceuticals, chemicals and food. The machine features a simple structure with unique design, achieving uniform mixing with high efficiency and without material accumulation. The overall structure is simple, the operation is easy, and the parts in contact with the materials are made of high-quality stainless steel, presenting a beautiful appearance and facilitating maintenance and cleaning.
干粉V型混合机粉末搅拌机原理与结构
Principle and Structure of Dry Powder V-Type Mixer/Powder Blender:
本机一端装有电机与减速机,电机功率通过皮带传给减速机,减速机再通过联国器传给V型桶,使V型桶能连续运转,带动筒内物料进行均匀的混合搅拌。
One end of this machine is equipped with a motor and a reducer. The power of the motor is transmitted to the reducer via a belt, and then the reducer transmits the power to the V-shaped barrel through a coupling, enabling the V-shaped barrel to operate continuously and causing the materials inside the cylinder to undergo uniform mixing and stirring.
干粉V型混合机粉末搅拌机使用及保养
Dry powder V-type mixer - Powder mixer usage and maintenance:
1.安装:将机械放置平稳,装好机脚,垫平,使机械能运转自如。
2.使用前先将需要加油处加好油,然后进行空载运转,检查各装置固件是否有松动。电气是否正常,机械是否运转正常,如有异常,需进行整修和调试。
3.将加料口转至上方,打开加料盖进行加料,加料量不可超过规定容积然后关紧加料盖,开动机器进行运转,途中如发现异常,必须停机检查。
4.下班后或者是更换品种必须将料斗内、外冲洗干净。
1. Installation: Place the machine steadily, install the machine feet, level it, and ensure that the machine can operate freely.
2. Before use, add oil to the necessary parts, then perform no-load operation to check if all device fasteners are loose. Check if the electrical system is normal and if the machine is operating normally. If there are any abnormalities, repair and debug are required.
3. Rotate the feeding port upwards, open the feeding cover to add materials, the amount of added materials should not exceed the specified volume, then close the feeding cover, start the machine to operate. If any abnormalities are found during operation, the machine must be stopped for inspection.
4. After work or when changing varieties, the material hopper inside and outside must be rinsed clean. |
|
规格
model |
桶体容积
Bucket volume |
工作容积
working volume |
电机功率
motor power |
混合转速
Mixed speed |
外形尺寸
Overall dimensions |
最大装量
Max loading weight |
机器重量
machine weight |
VH-2L |
2L |
0.8L |
0.06kw |
24r/min |
450mm*270mm*450mm |
0.5kg |
13kg |
VH-5L |
5L |
2L |
0.55kw |
24r/min |
560mm*270mm*560mm |
2kg |
35kg |
VH-8L |
8L |
3.2L |
0.55kw |
24r/min |
610mm*280mm*740mm |
2.5kg |
40kg |
VH10 |
10L |
4L |
0.55kw |
24r/min |
610mm*280mm*740mm |
2.8kg |
45kg |
VH-14L |
14L |
5.6L |
0.55kw |
46r/min |
780mm*350mm*850mm |
4kg |
72kg |
VH-20L |
20L |
8L |
0.55KW |
20r/min |
1090mm*460mm*1000mm |
10kg |
80kg |
 |
| 01 |
| |
机身外壳
fuselage cover |
转筒和机器均采用304不锈钢材质
Both the drum and the machine are made of 304 stainless steel. |
|
| 02 |
| |
控制面板
control panel |
可定时,调速,开关启停
Can be set for timing, speed adjustment, and has on/off function. |
|
 |
 |
| 03 |
| |
进料口
feed port |
食品级不锈钢耐磨方便
Food-grade stainless steel, durable and convenient
|
|
| 04 |
| |
出料口
discharge hole
|
简单操作方便自如
Simple operation, convenient and smooth.
|
|
 |
 |
| 05 |
| |
非标定制
Customized non-standard products |
支持来图来样定制特殊尺寸
Support custom orders for special sizes based on provided drawings and samples. |
|
|
| |
| |
|
|